Before You Buy

1. Measure your wall.*
2. Photograph your space.
3. Look for outlets and any other obstructions.
4. Contact us and tell us what you’re interested in.
5. We’ll put together a measured drawing for you, for free.

*We are not responsible for measurements taken on your behalf, nor for any obstructions that may prevent proper installation.

Shipping and Delivery

We ship to anywhere in the continental United States.

Orders are scheduled in the order received according to date/time of payment. 

Ready-To-Ship: Usually can ship within a few days.
Made-To-Order: These designs are made once the order is placed and lead time is typically 4-6 weeks.
Custom: Through our custom program lead time is typically 8 weeks.

Your setup will arrive via freight delivery. And since we insist on quality construction, the individual cabinets will be fully assembled and each one will have their own crate. Due to the weight, you will need two people to carry.

Yes. Depending on what you purchased, we would suggest you reach out to us first to make sure your vehicle is large enough to carry your order.

If you’re located within a two hour drive of our shop in Campbell, CA we can deliver for a fee. If you would also like installation, please see our response below under "Installation."


We use a very high-grade of plywood called Europly. It consists of 13 layers plus the 2 veneer layers for a total of 15. It’s heavier than most plywoods and these extra layers results in durability. In Europe they have a similar plywood called Baltic birch. However, ours is made in the USA and has a high-quality domestic veneer on the outside that gives it a very durable exterior layer that's great for a clear finish.

Unless otherwise noted, we use a high quality water-based finish that has a dull luster.

Each made-to-order setup has a measured drawing included in the thumbnails. If you’re looking at custom, we can do a range of widths that can be seen on our custom options page.

We can do that! The heart of our business has always been custom and you’ll work with our designer to create something that’s perfect for your needs. Just give us a call or use our contact page to reach out. Learn more about our custom program.

Yes, there are so many! In our custom program we’ll ask you for your top choices and send you a link to the laminate manufacturers website.


We would recommend the installation be done by a professional finish carpenter. However, if you’re an experienced DIY’er and good with a level then we can walk you through the installation.

Cabinets must be properly secured to stud framing within the wall. Wall units cannot be secured by poles alone. We will not be responsible for damages done during installation unless the installation is done by us.

If you’re located within a two hour drive of our shop in Campbell, CA we can deliver and install for a fee. We are licensed, insured and bonded in California. (License #1064722.)

Returns and Exchanges

Please read our full return policy here.